--- 美国SPEX CLP项目标液 ---

工作曲线标准溶液3

Instrument Calibration Standard 3

元素：2000mg/L: Al, Ba
1000mg/L: Fe
500mg/L: Co, V
250mg/L: Cu
50mg/L: Be
基体：5% HNO3
体积：125mL
编号：ICAL-3

用途：Assurance 级，电感耦合等离子体发射光谱仪（ICP-AES）分析用元素标液。EPA合约实验室CLP项目标液。
证书：每份标液都附有一份内容详细的标准物质证书，证书报告标液中多至68种痕量杂质元素含量实际测量结果。
溯源：美国NIST SRM  (Traceable by NIST SRM)
资质：美国实验室认可协会（A2LA）标准物质生产商认可证书（2495.01）和测试实验室认可证书（2495.02），遵循ISO 17034-2016, ISO 17025:2005, ISO 9001:2008规范。

生产商：美国SPEX公司

**应用参考 · INSTRUCTION**

可以单独和混合使用以下标液建立工作曲线，混合后的标液包含目标Target Analyte List (TAL)所有元素。仪器需每天或每次校准，校准标液需新鲜配制，用后丢弃。对于ICAL-2, ICAL-3, ICAL-4A，建议稀释100倍。对于ICAL-1，建议稀释10倍。Sb、Hg元素按需稀释。
May be used separately or mixed together for preparation of the analytical curve. When mixed, these solutions will yield a standard containing all of the elements in the Target Analyte List (TAL). Instruments must be calibrated daily, every 24 hours, or each time the instrument is set-up. Calibration standards must be prepared fresh for each analysis and discarded after use. A dilution of 100-fold is suggested for ICAL-2, ICAL-3 and ICAL-4A, and a dilution of 10-fold for ICAL-1. Antimony and mercury can be diluted as required.
For ISM 01.2, at least one of your calibration standards must be at the Contract Required Detection Limit (CRQL).