--- 美国SPEX CLP项目标液 ---

ICP检出限检验标液2

ICP Contract Required Detection Limit Standard 2

元素：200mg/L: Fe
120mg/L: Sb, Zn
100mg/L: Co, V
80mg/L: Ni
70mg/L: Se
50mg/L: Cu, Tl
30mg/L: Mn
20mg/L: As, Cr, Pb, Ag
10mg/L: Be, Cd
基体：5% HNO3/tr Tartaric Acid/tr HF
体积：125mL
编号：CRDL-2

用途：Assurance 级，电感耦合等离子体发射光谱仪（ICP-AES）分析用元素标液。EPA合约实验室CLP项目标液。
证书：每份标液都附有一份内容详细的标准物质证书，证书报告标液中多至68种痕量杂质元素含量实际测量结果。
溯源：美国NIST SRM  (Traceable by NIST SRM)
资质：美国实验室认可协会（A2LA）标准物质生产商认可证书（2495.01）和测试实验室认可证书（2495.02），遵循ISO 17034-2016, ISO 17025:2005, ISO 9001:2008规范。

生产商：美国SPEX公司

**应用参考 · INSTRUCTION**

For ILM 05.3，一个标液必须在合约检出限上运行。为验证合约检出限附近的线性情况，每次分析开始后，在使用验证工作曲线标液ICV/ICB之后，在干扰测试标液ICSA / ICSAB之前，使用此标液。
For ISM 01.2，至少一种校准标液浓度须在合约检出限附近，此标液稀释后作为校准标液，可做此用途。
For ILM 05.3, a standard must be run at the Contract Required Detection Limits (CRDL). To verify linearity near the CRQL, this standard is analyzed at the beginning of the analysis run, after the ICV/ICB and before the ICSA and ICSAB. In addition, this standard must be run at a frequency of not less than 20 analytical samples and at the end of the analysis run, followed by the ICSA/ISCAB. The sequence order is CCV, CCB, CRI, ICSA, ICSAB, CCV, and CCB.
For ISM 01.2, at least one of your calibration standards must be at the Contract Required Detection Limit (CRDL). This standard, when diluted, can be used as a calibration standard to fulfill this requirement.